Projects

For many years, our company has been dealing with the problems of finding (detecting), fixing and eliminating leaks of industrial gases on pipelines and other technological assets (including methane leaks from gas pipelines).

“EKO SMART LABORATORY” LLC has the opportunity to offer the best options for diagnostic equipment for detecting methane leaks, namely:

Methane detector – Hi Flow Sampler is a structurally safe tool powered by a built-in battery. Enables you to accurately measure the volume and rate of natural gas leakage from any pipe fittings, spool seals, and compressor seals in natural gas main lines, storage facilities, and compressor stations. The intensity of the leakage from the component is measured by sampling at a high speed (from 1.42 to 297 l / min), in order to completely capture all the gas leaking from the equipment unit. Accurate measurement of the flow rate of the sample and the concentration of natural gas in this flow allows you to calculate the intensity of the leak. The device automatically compensates for the difference in the specific gravity of air and natural gas, thus ensuring the accuracy of the leak intensity calculation.

Areas of application of the Hi Flow Sampler:
The use of the Hi Flow sampler allows you to optimize the maintenance budget, because it will indicate which components need to be serviced, knowing the amount of lost gas and the payback period of the repair.
Diagnostics of nodes of high and low pressure gas pipelines, PSG, crane nodes;
Diagnostics of gas storage, tanks and gas distribution stations;
Environmental monitoring, including for “Kyoto Protocol” projects on reducing greenhouse gas emissions.

Principle of operation of the Hi Flow Sampler sampling device:
The calculation of the intensity of the leak is based on the accurate measurement of the flow rate of the sample and the concentration of natural gas in this flow.

EYE-C-GAS:
It is specially designed for use in the gas, oil and petrochemical industries, taking into account the requirements of users.
High sensitivity and lower leak detection threshold than existing portable optical gas imaging devices.

It is certified for use in hazardous areas (Class 1, Div. 2 and ATEX II), which allows you to carry out inspections in hazardous areas of various industries.
It has an internal video and audio recording device. Large color LCD display for images and text. The strength and reliability due to the design of the camera allows you to use it in the most difficult operating conditions.

High sensitivity in the region of the spectrum invisible to the human eye provides the exceptional value of the EYE-C-GAS camera as a tool for detecting leaks as fugitive emissions.

DP-IR is a new generation methane detector for testing gas distribution networks, which significantly increases the productivity, cost and safety of leak detection work. The principle of its operation is based on IR-CIPS optical technology (infrared spectrometry with controlled polarization), which provides a detection sensitivity of up to 1 ppm. Unlike ionization gas analyzers, which also have high sensitivity, DP-IR does not require the use of hydrogen as a fuel gas.
The DP-IR has a built-in self-test function that checks the correct operation of the device. Using an internal calibration cell, the operator performs a self-test as part of the daily start-up procedure.

The DP-IR detector works in a variety of environmental conditions, including cold or hot weather. Its robust design ensures stable operation in any field conditions.
The device is designed for selective detection of methane, which excludes false positives for other hydrocarbon gases.

RMLD-CS is a new compact laser device for remote detection of methane leaks at a distance of up to 30 meters. The applied technology – TDLAS (absorption spectroscopy using a tunable semiconductor laser) – allows you to find leaks in hard-to-reach places: busy roads, pipelines, fenced areas, bridge pipes, tanks, biogas plants, etc.

With the help of a built-in color camera, the user receives an image of the place where the laser beam of the detector is directed. The image and associated measurement data, including GPS coordinates, are stored on the internal SD card. This allows you to effectively document the detected leaks and generate reports on the work performed.

INSPECTRA® LASER is a portable natural gas leak analyzer with laser spectroscopy. This highly sensitive detector offers all the advantages of optical detection in a very compact and portable device, providing accurate and reliable results when detecting methane leaks.

• Full selectivity to methane;
• Extended measurement range, from 1 ppm to 100% gas volume;
• High sensitivity methane, below 1 ppm;
• ATEX certified, it can be used safely indoors and outdoors, as well as in hazardous areas;
• User-friendly;
• Minimal maintenance;
• Survey traceability with NGS survey software installed on the tablet and control of the built-in GPS receiver;
• Light weight, compact design for maximum comfort of operation (2.7 kg with batteries);
• Maximum operational autonomy: power provided by rechargeable batteries

The latest addition to the GAZOMAT ™ product line, the next generation GAZOSCAN ™ is a portable remote methane detector (RMD). This laser-based RMD is easy to use, highly sensitive, and easily detects at a distance of 100 meters (330 feet), making it the best tool for residential and commercial natural gas leak testing, natural gas and methane pipeline gas leak testing checking gas container leaks.

The GAZOSCAN ™ device is used in any situation where work near the viewing area is impossible.

The FLIR GF77 is an innovative uncooled optical imaging camera with interchangeable lenses that detects methane, sulfur hexafluoride (SF6), ethylene, ammonia and other gaseous emissions. Capable of both gas detection and radiometric temperature measurement for thermal inspections, the GF77 is ideal for electric power, oil and natural gas, chemical/manufacturing, food and agriculture industries, and first responders. This affordable solution offers the benefits of built-in thermographic calibrations and the flexibility to detect a wide range of gases by simply changing lenses.

The FLIR GF300 detects methane, other hydrocarbons and volatile organic compounds resulting from the production, transportation and use of oil and natural gas. This camera can scan large areas and visualize potential gas leaks in real time, so you can inspect thousands of components in a single survey. Designed with the user in mind, the GF300 is lightweight, offers both a viewfinder and an LCD monitor, and has direct access to controls.

The FLIR GF320 detects emissions of hydrocarbons and volatile organic compounds (VOCs) from the production and use of natural gas. With this optical gas imaging camera, inspectors can inspect thousands of components and see potential gas leaks in real time. The GF320 is lightweight, offers both a viewfinder and an LCD monitor, and has direct access to controls. Built-in GPS data helps pinpoint the exact location of faults and leaks for faster repairs.

The FLIR GF620 is FLIR’s first high-resolution hand-held camera for detecting methane and other volatile organic compound (VOC) emissions. With its innovative 640 x 480 resolution infrared detector, inspectors can inspect thousands of components and safely scan for gases from greater distances. It is also the first FLIR OGI camera to offer Q-Mode for simplified setup of the optional QL320 gas quantification system.